Visit deltech.com
All Categories
All Categories
Products
30
Brands
3
Documents
58
Markets
Technologies
Products
Deltech
All Deltech
Search products
Matching Product Categories
CASE Ingredients
Base Chemicals & Intermediates
Markets
Physical Form
Certifications & Compliance
All Filters
14 Products
found on Deltech
Most Viewed
SDS
With SDS
TDS
With TDS
Deltech
Deltech Monomers Vinyl Toluene (VT)
Chemical Name:
Vinyltoluene
Chemical Family:
Vinyls, Vinylics & Vinyl Derivatives
Deltech Vinyl Toluene (VT) is a mixture of methylstyrene isomers, with approximately 55% meta and 45% para isomer distribution. This reactive monomer readily polymerizes to form a high-clarity, colorless polymer with excellent electrical and physical properties. In many applications, VT demonstrates superior properties compared to styrene monomer.
Deltech
StanChem Polymers SC 5174
Chemical Family:
Vinyl Acrylic
Glass Transition Temperature (Tg):
18.0 - 18.0 °C
Features:
Improved Flexibility, Excellent Scratch Resistance
StanChem Polymers SC 5174 is a vinyl/acrylic copolymer developed specifically as latex for interior and exterior paints and coatings. StanChem 5174 exhibits an excellent combination of flexibility and hardness. Intumescent and fire retardant paints produced with SC 5174 provide superior scrub resistance, durability and flexibility.
Deltech
StanChem Polymers SC 5218
Chemical Family:
Vinyl Acrylic
Glass Transition Temperature (Tg):
20.0 - 20.0 °C
Features:
Improved Flexibility, High Durability, Excellent Scratch Resistance
StanChem Polymers SC 5218 is a surfactant stabilized vinyl/acrylic copolymer emulsion for paints and coatings. SC 5218 provides formulators with superior scrub resistance, durability and flexibility.
Deltech
StanChem Polymers SC 6458
Chemical Family:
Acrylics & Acrylates
Compatible Substrates & Surfaces:
Wood, Metal
Glass Transition Temperature (Tg):
35.0 - 35.0 °C
Features:
Excellent Adhesion
StanChem Polymers SC 6458 is a 100% acrylic copolymer that exhibits excellent adhesion to a wide variety of substrates including metal, wood and cementitious surfaces. SC 6458 is self-crosslinking and is capable of crosslinking with urea-formaldehyde or melamine binders.
Deltech
StanChem Polymers SC 5186
Chemical Family:
Polyvinyl Acetates (PVA)
Glass Transition Temperature (Tg):
30.0 - 30.0 °C
Features:
Blocking Resistance
StanChem Polymers SC 5186 is general-purpose polyvinyl acetate. It deposits a clear, tough film, which exhibits excellent resistance to heat and light. It provides good adhesion to cellulose. Films of SC 5186 exhibit good blocking resistance.
Deltech
StanChem Polymers SC 6044
Chemical Family:
Acrylics & Acrylates
Glass Transition Temperature (Tg):
12.0 - 12.0 °C
Features:
High Durability
StanChem Polymers SC 6044 is a high solids, medium hand, all acrylic and self-crosslinking emulsion. SC 6044 provides outstanding durability to washing and dry cleaning.
Deltech
StanChem Polymers SC 6261
Chemical Family:
Acrylics & Acrylates
Glass Transition Temperature (Tg):
28.0 - 28.0 °C
Features:
Excellent Adhesion, High Gloss, High Durability
StanChem Polymers SC 6261 is a 100% acrylic copolymer emulsion designed for durable house and trim paints. Paints and coatings made with SC 6261, in addition to durability; also exhibit good wet adhesion, good dirt pick-up resistance and good gloss retention.
Deltech
Deltech Monomers para-Methylstyrene (PMS)
Chemical Name:
3-Methylstyrene, p-Methylstyrene
Chemical Family:
Styrenics
Deltech para-Methylstyrene (PMS) is recommended for evaluation as a replacement for vinyltoluene and styrene monomers. It shares similar chemical properties and polymerization behavior with both vinyltoluene and styrene. When used as a partial or complete replacement for styrene monomer in unsaturated polyester resin applications, polymerized resin products exhibit lower vapor pressure at any temperature and a higher flashpoint. Additionally, PMS offers advantages such as lower shrinkage during molding, improved thermal properties, and greater tensile strength in glass-filled applications.
Deltech
StanChem Polymers SC 6257
Chemical Family:
Acrylics & Acrylates
Compatible Substrates & Surfaces:
Wood, Metal
Glass Transition Temperature (Tg):
33.0 - 33.0 °C
Features:
Water Resistance, Abrasion Resistance
StanChem Polymers SC 6257 is emulsion polymer that can be used as a binder for a variety of coatings for different substrates. Coatings formulated with SC 6257 exhibit good clarity, water resistance, abrasion resistance and excellent adhesion properties.
Deltech
StanChem Polymers SC 5184
Chemical Family:
Vinyl Acrylic
Glass Transition Temperature (Tg):
15.0 - 15.0 °C
Features:
Excellent Scratch Resistance
StanChem Polymers SC 5184 is a vinyl /acrylic copolymer designed for use in interior architectural coatings demanding excellent scrub resistance and reliable pigment dispersions.
Deltech
StanChem Polymers SC 6508
Chemical Family:
Acrylics & Acrylates
Glass Transition Temperature (Tg):
12.0 - 12.0 °C
Features:
Excellent Adhesion
StanChem Polymers SC 6508 is an acrylic copolymer emulsion designed for exterior latex paints where wet adhesion is needed. Use of SC 6508 imparts improved adhesion to chalky and weathered surfaces.
Deltech
StanChem Polymers SC 6477
Chemical Family:
Acrylics & Acrylates
Compatible Substrates & Surfaces:
Wood, Metal
StanChem Polymers SC 6477 is a highly efficient, alkali-swellable acrylic emulsion that is recommended for thickening synthetic emulsions. SC 6477 can be incorporated directly into a binder system. Thickening begins with the addition of ammonia, sodium hydroxide or an amine to raise the pH to 7.0-8.0 for maximum thickening.
Deltech
StanChem Polymers SC 6445
Chemical Family:
Acrylics & Acrylates
Compatible Substrates & Surfaces:
Wood
Glass Transition Temperature (Tg):
41.0 - 41.0 °C
Features:
Solvent Resistance
StanChem Polymers SC 6445 is an acrylic copolymer emulsion that exhibits excellent UV resistance, good solvent resistance, good pigment binding and SC 6445 being carboxylated, can be cross-linked with melamine.
Deltech
StanChem Polymers SC 6016
Chemical Family:
Acrylics & Acrylates
Glass Transition Temperature (Tg):
25.0 - 25.0 °C
StanChem Polymers SC 6016 is self-crosslinking acrylic emulsion when the polymer is cured at temperatures of 300 – 350 °F, depending on the time and temperature of cure. Added acid catalyst can increase the rate of cure.